Product Overview

This 295050-0460 Common Rail Fuel Injector is a high-precision, direct replacement component engineered for modern diesel engines. Designed to meet stringent OEM specifications, it ensures optimal fuel atomization, combustion efficiency, and engine performance. We supply this critical part to a global B2B clientele, including distributors, workshops, and fleet operators across North America, Europe, the Asia-Pacific region, and the Middle East, backed by reliable international logistics.

Key Features & Benefits

• Precision Engineering: Manufactured to exact tolerances for consistent spray pattern and fuel delivery, ensuring maximum engine efficiency and power output.
• Enhanced Durability: Constructed with high-grade materials and advanced coatings to withstand high-pressure Common Rail systems and resist wear, corrosion, and cavitation.
• Optimal Fuel Economy: Precise metering reduces fuel waste, helping to lower operational costs and meet emissions standards.
• Reliable Performance: Ensures smooth engine idle, responsive acceleration, and reduced exhaust smoke for dependable vehicle operation.
• Rigorous Quality Control: Each unit undergoes comprehensive testing for flow rate, leak integrity, and electrical response to guarantee out-of-box reliability.

Technical Specifications

OEM Cross-Reference

This injector is a direct replacement for the following OEM part numbers:

• 295050-0460 (Primary Reference)
• 2950500460 (Alternate Format)

Note: Always verify cross-reference compatibility with your specific engine serial number before purchase.

Compatibility

This fuel injector is designed for compatibility with various diesel engines utilizing the 295050-0460 specification. It is commonly found in applications for commercial vehicles, industrial machinery, and agricultural equipment. To confirm exact fitment, please consult your engine service manual or contact our technical support with your engine model and serial number.

Global Supply & Distribution

We are a trusted partner in the global automotive aftermarket supply chain. Our operations are optimized for international B2B trade:

• Worldwide Shipping: We export via air and sea freight to all major markets, including the USA, Germany, UAE, Australia, and Japan.
• Fast Delivery Network: Efficient logistics ensure timely delivery to key industrial hubs and ports such as Rotterdam, Los Angeles, Singapore, and Jebel Ali.
• Export Compliance: All shipments are prepared with complete commercial invoices, packing lists, and comply with international trade regulations for smooth customs clearance.
• Regional Support: Dedicated support for buyers in EMEA, APAC, and the Americas to handle local requirements and logistics.

Quality Assurance

• Manufacturing Standards: Produced in ISO-certified facilities using CNC machining and automated assembly for consistent quality.
• Comprehensive Testing: Every injector is bench-tested for critical parameters: static leak test, dynamic response test, and flow rate calibration to ensure it meets performance specifications.
• Warranty: Backed by a standard 12-month warranty against manufacturing defects from the date of purchase, subject to proper installation and use.

FAQ

Q1: How do I confirm this injector will fit my specific engine?
A1: The most reliable method is to match the part number stamped on your original injector. Cross-referencing by engine model alone can be insufficient due to mid-year production changes. Provide your engine’s model, serial number, and the old injector’s number for our technical team to verify.

Q2: Are these injectors calibrated and ready to install?
A2> Yes. Each 295050-0460 injector is factory-calibrated and tested. It is delivered as a complete, sealed unit ready for installation. No further coding or programming is typically required, but always check your engine management system’s requirements.

Q3: What is the recommended procedure when replacing a Common Rail injector?
A3> Critical steps include: 1) Thoroughly cleaning the injector seat and fuel line connections to prevent contamination. 2) Replacing the copper sealing washer and any O-rings with new ones. 3) Torquing the injector hold-down bolt to the manufacturer’s specified value. 4> Performing a system leak-down test after installation. We recommend the procedure be carried out by a qualified technician.

Our advantages

1.An authorized wholesaler of Isuzu genuine parts, Hino genuine parts, Mitsubishi genuine parts and Mahle parts.

2. We are not only supply genuine parts, but also high quality OEM parts, which are made in China or made in Japan.

3. More than 10 years of experience in machinery parts, professional supply of diesel engine parts.

4. Fast delivery, the fastest can be shipped in one day ,more than 500,000 of different types parts in stock.

5. Scientific ERP system, easy and fast to locate the parts that customer needs.

6. Professional technician checks the parts before delivery, to make sure the parts are correct, usable and defect-free.

Exhibition

Packing&Shipping

1.  Our shipment is by air/sea/express (DHL/FEDEX/TNT/UPS/EMS).

2.  Once we get confirmation of payment, we will ship products in 2 days.

3.  Our packaging is standard export wooden box or others as your requirement.

4. We’ll check and test the products before shipping , and givethe pictures to our customers to confirm.

FAQ

Q1. What is your company major products?

A: Our main products are Liner kit, Piston, Rings, Liner, Gasket kit, Bearing, Injection pump, Nozzle, Water pump, Oil pump,Crankshaft, Turbocharger,Filter, etc.

Q2.What is the MOQ?

A: Normally we can supply any quantity if we have in stock.

Q3. What is your payment term ?

A: We accept Western Union, T/T, Paypal.

Q4. What is the packing ?

A: Carton or wooden case , If you want to put your logo on the packing , We will do it after get your authorization letter.

Q5. When can you deliver products after payment ?

A: By Express ,usually might take 3-4 days ;By Air , Usually take 7-9 days ; By Sea ,usually take 1-2 months .

Q6. What can you do to complete order perfectly ?

A: In the beginning , We will communicate with clients in details to understand what they need .

Before packing , We will check the products and send photos to clients .After confirmation ,

We will packing products well to avoid damage . Once we get tracking number ,

We will send it to customer and keep contact in with clients .